montajIf we look at the statistics of the breakdown of costs in the construction of a country house, it becomes obvious that most of it goes towards the installation of engineering systems. It is approximately 25-40% of the total amount of construction, but the exact percentage depends directly on the complexity of the systems themselves. Usually engineering systems in the cottage and country house are divided into 2 types: external and internal. External (outside) systems are those that are located outside the house. They are installed by certain companies, therefore the choice is almost always limited. Internal (inside) systems provide greater freedom of choice in terms of installation and contractor.

Any competent network installation begins with design. This stage will allow the customer to clearly see the network communication in the house. Despite the fact that the project is only on paper, it will identify and solve a number of contentious issues before the experts proceed directly to the installation. Well-formed project communication will save a lot of time, which in its absence would create issues with the customer. Also it will save money on the purchase of materials and will eliminate the need to perform unforeseen work.

In the preparation process the customer formulates the technical brief which becomes the basis of future development of networks and communications design. Also secondary data that is previously collected by the contractor that performs the installation is taken into account.

Network installation is performed throughout the entire construction process and is done in several stages. It begins with a "zero cycle": setting embedded parts for drainage; and ends with the installation of sanitary appliances. Internal systems are interconnected, for example; the heating system involves the use of the power supply system, and ventilation needs heat energy, etc. At this stage one needs to understand exactly where everything takes place before the contractors start the installation.

Any modern engineering system for a country house has several components: ventilation, air conditioning, drainage, heating, water supply. In all of these areas «Baltik-Company» is ready to offer a full range of activities. This not only includes the installation but also the design of the engineering systems, warranty and after-sales service. Proper condition of engineering networks and communications is the key to a comfortable and calm home life.

«Baltik-Company» provides a 2 year warranty on the installation works. For further information please contact our sales department: +7 (812) 275-60-77, +7 (812) 577-16-46

Installation services pricelist

Air conditioners installation

Installation works – primary works

Fee in roubles

Standard wall air conditioner installation 1,5 – 3,8 kw

9000

Standard wall air conditioner installation 4,0 - 6,0 kw

9800

Standard wall air conditioner installation 6,2 - 7,8 kw

11500

Standard wall air conditioner installation 8,0 - 11 kw

12500

Standard ceiling(cassette) air conditioner installation 3 - 5 kw

12300

Standard ceiling(cassette) air conditioner installation 5 - 7,8 kw

14550

Standard ceiling(cassette) air conditioner installation 8 - 12 kw

18800

Standard ducted air conditioning split system installation 5 - 15 kw

from 15000

Tower air conditioner installation 8,0 -21 kw

from 17000

Installation works – additional works

Heating drainage installation

500

Installation of SPDs (low temperature set)

from 2000

Installing the pump (without the drain hose)

1300

Canopy installation (when installing the outdoor block)

1400

Outdoor block protection installation

1900

Additional run without the case (up to 3 kw)

500

Additional run without the case (up to 5 kw)

600

Additional run without the case (up to 10 kw)

700

Additional run without the case (up to 15 kw)

1000

Additional run without the case (from 15 kw)

1200

Additional run inside the case (up to 3 kw)

600

Additional run inside the case (up to 5 kw)

700

Additional run inside the case (up to 10 kw)

800

Additional run inside the case (up to 15 kw)

1200

Additional run inside the case (from 15 kw)

1400

Drilling additional holes – per hole (d from 100mm to 600mm)

950

Groove for drainage (brick), metre

600

Groove for drainage (monolith), metre

800

Groove for drainage (concrete), metre

700

Groove for electrical cable (brick), metre

600

Groove for electrical cable (concrete), metre

700

Groove for electrical cable (monolith), metre

800

Groove for refrigerant pipe run (brick) metre

800

Groove for refrigerant pipe run (concrete) metre

1000

Groove for refrigerant pipe run (monolith) metre

1500

Additional electrical cable (without case) with section up to 5х2,5 mm2

100

Additional electrical cable (in the case) with section up to 5х2,5 mm2

230

Additional electrical cable (in corrugation) with section up to 5х2,5 mm2

180

Aerial platform up to 18m

12000

Air conditioner dismantling up to 7,8 kw (without a run)

3500

Air conditioner dismantling 8 - 10 kw (without a run)

4100

Indoor block dismantling up to 7,8 kw

1500

Indoor block dismantling from 8 kw

1700

Outdoor block dismantling up to 7,8 kw

2200

Outdoor block dismantling from 8 kw

2400

Run dismantling (without case), metre

80

Run dismantling (in the case), metre

130

Dismantling and installing of cable bracket

500

Additional drainage laying (in the case)

230

Additional drainage laying (without case)

100

Equipment lift (higher than Level 2, for each level), set

100

Installing and dismantling of 1 m high scaffolding

900

Dismantling and installing of suspended ceiling (Armstrong), m2

150

Visit outside of Ring road up to 10 km

500

Visit outside of Ring road more than 10 km (per 1km)

40

Air conditioner refill

1500

Delivery outside of Ring road up to 10 km

500

Delivery outside of Ring road more than 10 km (per 1km)

40

Delivery within St. Petersburg

From 500

Work-at-height specialist

From 2900

Work (1 workforce a day) 1 workforce =2 people

1500

Travel expenses (1 workforce )

1500/24 h

Installation – installation of only indoor blocks

Wall air conditioner indoor block 1,5 – 3,8 kw

2000

Wall air conditioner indoor block 4,0 - 6,0 kw

2500

Wall air conditioner indoor block 6,2 - 7,8 kw

3000

Wall air conditioner indoor block 8,0 - 11 kw

4000

Ceiling(cassette) air conditioner indoor block 3 - 5 kw

3300

Ceiling(cassette) air conditioner indoor block 5,5 - 7,8 kw

3700

Ceiling(cassette) air conditioner indoor block 8 - 12 kw

5000

Ducted air conditioning split system indoor block 5 - 15 kw

от 5000

Tower air conditioner indoor block 8,0 -21 kw

от 7000

Water heater installation

Unit of measurement

Fee in roubles

Standard storage water heater installation (up to 50 litters volume)

unit

4000

Standard storage water heater installation (more than 50 litters volume)

unit

4500

Standard tankless single phase water heater installation

unit

3000

Standard tankless three phase water heater installation

unit

3500

Storage water heater installation/replacement (up to 50 litters volume) at the old or prepared place

unit

2500

Storage water heater installation/replacement (more than 50 litters volume) at the old or prepared place

unit

3500

Tankless water heater installation/replacement at the old or prepared place

unit

2000

Installation works

Fee in USD

Fee in roubles

Boiler installation

Condensing gas boiler

200

8000

Boiler–room turnkey works (up to 50 kw) - 1 boiler

1000

40000

Boiler–room turnkey works (up to 100 kw) - 1 boiler

1250

50000

Boiler–room turnkey works (up to 200 kw) - 1 boiler

1625

65000

Boiler–room turnkey works (up to 300 kw) - 1 boiler

1875

75000

Single walled smoke stack

55

2200

Insulated double walled smoke stack

75

3000

Heating system installation (per heating unit)

Cooper

110

4400

Plastic+ metal

90

3600

Polypropylene

95

3800

Floor heating (per 1 м2)

30

1200

Laying insulation on the pipe

1

40

Removing and installing of radiator for carrying out finishing works

30

1200

Installation of collector enclosure

30

1200

Water test

60

2400

System refill

80

3200

Sewerage and water supply systems installation (per point of connection)

Sewerage

45

1800

Cooper

60

2400

Plastic + metal

45

1800

Polypropylene

50

2000

Tying the filter flask mechanical cleaning

40

1600

Towel drier installation

90

3600

Plumbing fixtures installation

Flush toilet installation with connection

50

2000

Installation of the system such as Sololift

50

2000

Flush installation (for toilet, bidet)

80

3200

Sink installation with connection

50

2000

Walk–in shower installation

100

4000

Shower tower installation

80

3200

Commissioning works

Wall mounted gas heater up to 40 kw

100

4000

Wall mounted gas heater from 40 to 100 kw

160

6500

Three-pass boiler up to 40 kw

350

14000

Three-pass boiler 40-100 kw

425

17000

Three-pass boiler 100-360 kw

750

30000

After-sales service

Annual service (condensing gas boiler) up to 40 kw

150

17000

Annual service (condensing gas boiler) from 40-100 kw

600

24000

Annual service (boiler up to 100 kw)

750

30000

Annual service (boiler from 100-360 kw)

1375

55000

Additional works

One power station installation (wall outlet, breaker, switcher)

10

400

Concrete wall drilling 15-32 d.

unit

500

Concrete wall drilling 40-100 d.

unit

850

Drilling partitions

unit

350

Cables installation in plastic pipe work, corrugation, case

10

400

Grooving (wall chasing) for piping up to 32 mm

15

600

Grooving (wall chasing) for piping 32...60 mm

20

800

Grooving (wall chasing) for piping 60...110 mm

30

1200

Technical specialist visit price list

  • Technical specialist visit within St. Petersburg - 2300 rub.
  • Up to 20 km – (initial rate) x 1.1
  • Up to 50 km - (initial rate) x 1.2
  • Up to 100 km - (initial rate) x 1.4
  • Up to 150 km - (initial rate) x 1.5
  • Up to 200 km - (initial rate) x 1.6
  • Up to 250 km - (initial rate) x 1.7
  • Up to 300 km - (initial rate) x 1.8
  • More than 300 km - (initial rate) x 2.0